Mmtool aptio 4.50.0023 how to#
Mmtool aptio 4.50.0023 install#
Mmtool aptio 4.50.0023 update#
Mmtool aptio 4.50.0023 rar#
Mmtool aptio 4.50.0023 pro#

Enter a 'Vol Index' (the module from the 990FX BIOS went in at '01').

Insert the extracted DXE file into the latest version of the motherboard BIOS. No investigation into the differences was made. The second one I tried from an Asrock 'Fatal1ty 990FX Killer' v1.30 BIOS worked so I used that (the BIOS was new and it's description included 'Improve M.2 compatibility' and 'support NVME'). The first was from an Asrock Z97 Extreme6 BIOS. Once complete I was able to boot the machine directly into Windows ењ†4 v7 (SP1). Reading some of the the following information on the UBU tools might be useful. This procedure uses the ' mmtool.exe' executable.

Mmtool aptio 4.50.0023 rar#

Add the SAMSUNG_M2_DXE file to the Asus motherboard fileДownload the UBU rar from and put the files into a directory.

Extract the SAMSUNG_M2_DXE file from a BIOS.

This should serve as a good advertisement for the BIOS support in Asrock motherboards. I also opened a support ticket with ASUS but that has proven to be fruitless. This documentation is the minimum I had to do to get the BIOS booting. At the time of writing the UBU (UEFI BIOS Updater) v1810 supports Aptio 4 BIOS - newer X99 chipset boards are not supported by this version. This steps are only appropriate for motherboards with AMI BIOS. Using the MMTool Aptio a bootable BIOS was generated by using the Samsung_M2_DXE from a Asrock BIOS.

Mmtool aptio 4.50.0023 pro#

I also used an Adata XPG SX8200 Pro 256gb as my PCIe x4 NVMe drive.The standard Asus BIOS for this motherboard doesn't support booting a Samsung XP941 NVMe SSD (MZHPU512HCGL-00000). Since this board doesn't have any NVMe ports, I used thisВ adaptor (see image attachment) Revert the following BIOS settings once rebooted Once this is complete, remove the flash drive and reboot your PC (pressing ctrl+alt+del). Do not ever interrupt this process as doing so will end you with a dead board. It will now reprogram your motherboard's BIOS with the modded one. Prepping a USB flash drive to make a DOS-bootable driveД¬opy BIOS modding files (AFUDOS and modded A11 BIOS) onto the USB-DOS-bootable flashdriveД¬opy afudos.exe and the modded A11 BIOS file (a11mod.bin) onto the root path of the flashdriveД«oot into the flashdrive to load DOS, in DOS, you type-in Secure Boot Control and Load Legacy ROM should be disabled. This needs to be done under DOS which you need Rufus to create a DOS-bootable USB flashdrive - found in this link.Д«ooting into DOS requires you to set the following up during this partД¬hange the boot mode to legacy (if you are in UEFI)

Mmtool aptio 4.50.0023 update#

I used AMI's firmware update tools AFUDOS - found in this link ( BiosTools.zip) There's no official Dell Tool in applying modded BIOS Name it more appropriately (ex: a11mod.bin - file type is Aptio Files *.fd)ДЄlso, explained in thereВ are waysВ you can verify if you did the modding correctly.В As with any BIOS mod: PRACTICE CAREFULNESS and double checkВ if necessary.ДЄpply the modded BIOS onto your motherboard - suspense part You can confirm a successful inject by browsing further down so you can see NvmExpressDxe_4 is present and that it's volume isВ 02:01-00 as seen below.Д¬lick Save Image as to save the modded BIOS. It should look like so.Д¬lick Insert button to inject the NVMe definitions. Browse on the extracted file calledВ NvmExpressDxe_4.ffs. Within the 'Insert' tab which you currently are, click Browse button. Scroll down on the lower part of the window until you find the module with a FileName 'CSMCORE' and highlight it. Click Load Image and browse to your a11.bin file. I've attached key files here so you can DIY In my case, I used option B - using AMI's MMTool. Link here.Д®xplainedВ in there are two ways on how you can modify your firmware.

Mmtool aptio 4.50.0023 how to#

Copy it into your desktop.ДЇrom the wonderful guys at WIN-RAID forums (great shout out to Fernando ), heВ came up with a solution on how to modify your BIOS and inject NVMe definitions into it to allow your board to boot from ANYВ NVMe drives. The BIOS file you need to look for is called a11.bin. While the exe file is running, go into the %TMP% folder (in my case it's theВ 2WSX3EDC folder). Keep it open, else, the temp files will be deleted. Since it is in EXE form, you have to execute it to extract the actual BIOS file - don't worry about executing it as it will not do any flashing yet.

Mmtool aptio 4.50.0023 install#

If can install NVME drive as boot drive - uhm, yes, with a BIOS ModДЇor the 3rd part, I had to MOD the latest A11 BIOS which can be done via:Дownload A11 BIOS hereВ - filename isВ AuroraR4_A11.exe Its UEFI SMBIOS - i don't know (lol) but will research The board supports it (from the BIOS setting) - just to be safe, I used an 8-core Xeon E5-2670 CPU. Support for PCIe 3.0 is dependent on the CPU. I have this motherboard on a new ATX casing and to clarify its specs: